The inspector sets the target
Use the inspector’s marked surface, viewing requirement and access route as the brief. If an area remains obscured, record the location so the inspector can decide what follows.
Inspector involvement before the cleaning date
The inspecting party marks the seams, plates, nozzles or fittings it needs to see. The quotation should repeat those areas so cleaning is not judged against an unstated expectation.
Corrosion, coating breakdown or damaged fittings can become visible as deposits are removed. The contractor lists the accessible marked areas and anything that remains hidden. The examiner makes every engineering or condition judgement. The tank inspection preparation service keeps those roles distinct.
The inspector identifies the viewing areas, equipment that remains fitted, residue that could obstruct the technique and the person accepting the cleaned condition.
Does an inspection clean include the inspection itself?
No. The contractor prepares the agreed tank surfaces for examination. The inspection and any fitness decision remain with the appointed competent party.
Can you clean only the suspected defect area?
A targeted clean may be possible if access and residue control allow it. The inspecting party should confirm that the exposed area will be sufficient for its purpose.
What do you provide at completion?
The cleaning record should list the completed areas and relevant access limits. Use the tank cleaning handover record to keep the site and cleaning contractor notes under one vessel reference.